You're currently on:

JMPv2 Jointmaker Pro

Zoom Out
Zoom In

JMPv2 Jointmaker Pro

Item Number: 6001001

Availability: Non-Stock Item Learn more »

Quick Overview

The Jointmaker Pro v2 holds a custom Japanese saw blade rigid and straight while your clamped wood is pushed through the blade to make the cut. With everything held securely, the resulting cut is perfectly straight and extraordinarily clean.

The JMPv2 Stand and JMPv2 Precision Fence System are sold separately.

Bookmark and Share

Product Description

It is now possible to obtain—regardless of skill level—professional quality cuts without the need for hearing protection, dust collection or electricity. And the resulting cuts (unbelievable until you see it for yourself) require no further clean-up--no need for shooting boards or plane and chisel work. Please meet the Jointmaker Pro v2…

The Jointmaker Pro v2 (patent pending) is a hybrid device, a hand saw that employs custom Japanese saw blades offered in crosscut and rip grinds. The blade quickly attaches to a spine which is part of the blade adjustment carriage. The blade moves up and down via a hand-crank on the front of the machine and features an independent pitch adjustor. This combination allows for perfect crosscuts up to six inches in width and in material up to 1-3/4” thick. Small cross-sections like small moldings and dowels can be cut in one pass; the size of larger cross-sections and the hardness of wood will determine the number of passes for a through cut. In either case, the cut is unbelievably smooth and true. The kerf is only .021”— it is phenomenally efficient. It comes with 3 crosscut A blades.

Traditionally, wood is held in a vise or clamped to a bench and then cut with a handsaw. With the Jointmaker Pro v2, your stock is rigidly held on the linear table (there are various methods depending on the type of cut). All you do is provide the easy back-and-forth motion. Between each stroke, you adjust the blade height for the next cut (if necessary). It may sound complex, but after a few practice cuts you’ll find yourself in a rhythm, where all of this happens quickly and without thought. More importantly, the resulting cut is so smooth it is hard to believe—and achieved with very little noise and no electricity. And it is so versatile. The tables allow for all kinds of shop-built fixtures and accessories as your reliance on the Jointmaker Pro v2 grows. You will find, like I did, many new ideas and uses for this amazing saw once you get your hands on it.

Most hand accidents involving saws are caused by work-holding risks on power equipment. As such, most woodworkers tend to avoid smaller projects because of these risks. With the Jointmaker Pro v2, the fear of losing digits is all but gone, and the world of making amazingly accurate cuts in small stock is not only easy, it is a whole new aspect of woodworking that is every bit as rich an experience as building larger-scale pieces. There is an old saying, “woodworking gets more difficult the smaller the scale.” I respectfully submit that this belief is no longer accurate. And yet the JMP v2 is equally adept at cutting stock up to 6 inches (152.5mm) in width and 1-3/4” (44.5mm) thick. Hardness of the wood does not matter as you adjust the pitch accordingly to allow the saw to cut efficiently with each stroke.

The Jointmaker Pro v2 is identical to the original JMP in every way with the exception of the linear table design–the JMP v2 features a recirculating linear bearing system (the bearings follow a closed loop). They do not need adjustment (factory assembled) and they do not require lubrication. The main advantage is they are easier to use (much less friction) at the expense of a bit more noise. The acetyl bearings are much quieter than steel bearings and we are thrilled with the results. The tables feel effortless and are easily used with one hand. The applications and uses for this tool are enormous

The Jointmaker Pro v2 is ideal for: Box Makers • Musical Instrument Makers • Architectural Model Makers • Toy Makers • Picture Framers • Furniture Makers • Artists • Hobbyists • Model Railroad Set Builders • Model Makers • Environmentally concerned woodworkers • Professional Woodworkers •Special Effects Studios • Schools • Parquetry • Doll house makers … the only limit is one’s imagination! (Please visit the Jointmaker forum to learn how others are using this amazing new tool.

The JMPv2 is shipped assembled. Due to the size of the shipping box, this unit can be shipped UPS or Fed Ex but not USPS.

Please visit our Jointmaker forum to learn how others are using this amazing tool.

• The dimensions of the JMPv2 is 28" x 16" x 12" tall. It weighs 37 pounds.
• The JMpv2 Jointmaker Pro comes with 3 Crosscut A blades.
• Made mostly of anodized aluminum.
• The gears are nylon. This is a perfect application for nylon gears. There is no backlash and it is a low-load and low-rpm mechanism. We have had great success with these parts.
• The Fences are Trap Jaws are made of Poplar. They are consumable items and replacements are available to order or you can make your own. Blades are made in Japan specifically for this saw.
• The Crosscut A (28 tpi) is the most commonly used blade. We use it 90% of the time. It has a kerf of .017" . Accessory Blades (Crosscut B; Crosscut C and the Rip Blade) are available. The Crosscut B (32 tpi) should be used with softer woods of smaller dimensions. The Crosscut C (28 tpi) allows luthiers to cut 0.023" fret slots in a single pass. Although this blade was designed for fret wire, it is actually a slightly thicker crosscut blade which may have an appeal for those who are cutting dense woods as well. The Rip blade gives a great finish on rip cuts but cleaning the gullets may be necessary in between cuts depending on the species of wood.


Please contact our office for the most recent JMP owners manual at 1-800-253-3332.

Is the raising and lowering mechanism on the Jointmaker Pro supposed to wobble?

The “wobble” is totally normal. The rear height adjustor has to pivot around the axle at the front of the saw spine. It sits in a circular nut and is designed to react to the adjustment of the blade. It has no effect whatsoever on the cut.

Write Your Own Review

You're reviewing: JMPv2 Jointmaker Pro

How do you rate this product?*
  1 star 2 stars 3 stars 4 stars 5 stars

Recommended Products

  1. JMPv2 Precision Fence System "The Works"
    JMPv2 Precision Fence System "The Works"
    Non-Stock Item
  2. JMPv2 Stand
    JMPv2 Stand